• Home
  • Products
  • Anaconda Compact “HD” fitting, IP 67, nickel plated brass

Anaconda Compact “HD” fitting, IP 67, nickel plated brass

These Anaconda Heavy Duty compact nickel plated brass fittings are the same as the regular UL/CSA approved compact fitting in this chapter, however the stamped ferrule is replaced by a machined nickel plated brass ferrule and the nut is additionally marked with “HD”. The machined nickel plated brass ferrules provide a very high pull out strength and assure that the minimum required pull out value of 1556 Newton (350 lbs) according to the new Heavy Duty standard (CSA C 22.2 No. 18-3) is always guaranteed. These CSA Heavy Duty certified, “HD” marked fittings are suitable for Hazardous locations according to the Canadian Electrical Code CEC 2021.

1Describe your request
2Your contact details
  • Drop files here or
    Accepted file types: txt, doc, xls, pdf, docx, xlsx, jpg, jpeg, gif, pngtiff, zip, rar, Max. file size: 5 MB.
      Only txt, doc, xls, pdf, docx, xlsx, jpg, jpeg, gif, png. tiff, zip or rar is allowed. Max. file size 5 MB

    • Specifics
      Special approvals: UL-514B and CSA C 22.2 No. 18.3 HEAVY DUTY (combined UL/CSA file # E 234207 ). Suitable for use in hazardous environments according to NEC: - Article 501.10 (B) (2) Class I, Division 2 - Article 502.10 (A) (2) and (B) (2) Class II, Division 1 and 2. - Article 503.10 (A) (3) and (B) Class III, Division 1 and 2. CSA approved HEAVY DUTY, suitable for use in hazardous environment according to CEC section 18: Zone 2 per 18- 152-1(i), Zone 20 per 18-192-3(a), Zone 21 per 18-202- 4(a), Zone 22 per 18-252-1(i).
    • Material
      Counter nut, body and ferrule are nickel plated brass. Clamping ring is made from PA6 and the O-rings are from NBR rubber (black for ISO, blue for PG and white for NPT).
    • Construction
      Nickel plated brass fitting, consisting of 4 parts (counter nut, clamping ring, ferrule and body).
    • Colour
    • Temperature
      -45 °C till +105 °C
    • Protection class
      IP 67